by poorly maintained products.
- Keep the exterior of the air compressor dry, clean and free from oil and
free from oil and grease. Always use a clean cloth when cleaning. Never
use break fluids, gasoline, petroleum- based products, or any strong
solvents to clean the unit.
- Following this rule will reduce the risk of deterioration of the enclosure
plastic.
SPECIAL SAFETY RULES
- Know your air compressor. Read operator's manual carefully. Learn
its applications and limitations, as well as the specific potential hazards
related to this product. Following this rule will reduce the risk of electric
shock, fire or serious injury.
- Drain tanks of moisture after each day's use. If unit will not be used
for a while, it is best to leave drain valve open unit such time as it to be
used. This will allow moisture to completely drain out and help prevent
corrosion on the inside of tanks.
- Risk of fire or explosion. Do not spray flammable liquid in a confined
area must be well ventilated Do not smoke while spraying or spray
where spark or flame is present. Keep compressors as far from the
sparing arras as possible, at least 4.5m (15 feet) from the spraying
area and all explosive vapors.
- Risk of bursting. Do not adjust regulator to result in output pressure
greater than marked maximum pressure of attachment. Do not use at
pressure greater than 10 bar.
- If connected to a circuit protected by fuses, use time delay fuses with
this product.
- To reduce the risk of electric shock, do not expose to rain. Store indoors.
- Inspect tanks yearly for rust, pin holes, or other imperfections that
could cause it to become unsafe.
- Never weld or drill holes in the air tanks.
- Make sure the hose is free of obstructions or sangers.
- Entangled or snarled hoses can cause loss of balance or footing and
22
Air Compressor 10L