mondaine stop2go Einrichtungsanleitung Seite 7

C.
How to enter the settings screen
Due to compatibility limitation of some mobile devices, the following situations may occur.
The corresponding operations are as follows:
CASE 1
After you select on your mobile device WLAN list - the clock <WiFi-Clock-EXAMPLE>
(every clock has a unique identification number), if the setting interface will not pop up
automatically, but you have a notification in the notification bar indicating that the mobile
device is connected to the WiFi clock. Click directly on the notification bar - the setting
interface will pop up automatically.
CASE 2
After you select on your mobile device WLAN list - the clock <WiFi-Clock-EXAMPLE>
(every clock has a unique identification number), if the setting interface will not pop up
automatically also after you tried CASE 1, or it directly pops up a blank web page. Go
to your mobile device internet browser and enter 192.168.4.1 in the URL field and click
"search", the setting interface will pop up.
D.
Fault verification and solution
(Special case)
FAULT 1
After the WiFi clock is powered on, the hands keep moving (it stops for a short time every
10 seconds and then starts again. Cycle).
Solution: The battery is insufficient, replace the new battery (alkaline).
FAULT 2
After setting the network, the hands stop at 12 o 'clock when the WiFi clock cannot get
the time, indicating that it didn't connect correctly with your WiFi – restart the process at
step 1.
Solution: Confirm that setting content is correct (account and password), reset after click
Save your Settings button and try again. Or re-start the WiFi clock connection Settings.