mondaine stop2go Einrichtungsanleitung Seite 6

A.
WiFi Clock function descriptions
stop2Go FUNCTION
The second hand turns 360° degree in 58.5 seconds, it stops at 12 o 'clock and pause
for 1.5 seconds.
EOL (END OF LIFE) BATTERY
If the hour and minute hands stop at 1:50, the battery voltage is low, and the battery
needs to be replaced (lithium, alkaline).
WiFi FUNCTION
WiFi clock only supports 2.4GHz connection.
SUMMER AND WINTER TIME
Time changes are not done automatically. This needs to be set manually, the same way
as the first installation of the clock.
B.
Additional setting page information
The setting page has 4 languages to choose: English, German, Chinese, Japanese.
SEARCH WiFi BUTTON
click WiFi (SSID) Dialog box will show the SSID with the strongest signal.
RESET
To restore the interface content to its default settings, press both blue buttons located on
the back of the clock case - left button is M.SET and right button is REC. Make sure to
press both buttons simultaneously to complete the reset.
SAVE YOUR SETTINGS BUTTON
WiFi clock connected successfully: "Your Mondaine clock is connected", then you can
exit the mobile phone setting interface.
WiFi clock networking failure: "Didn't connect-try again". Please check the WiFi Password
and click again "Save Your Settings".
Note: You may need to press twice for the action to take effect.
Please ensure there are no spaces at the end of your password.