Reolink E1 Bedienungsanleitung Seite 3

Camera Introduction
Reset Button
* Press for more than five seconds to
restore the device to default settings.
microSD Card Slot
* Rotate the lens to find the
reset button and the SD card slot.
Daylight Sensor
Spotlight
Infrared Lights
Lens
Status LED
Built-in Mic
Speaker
Network Cable
Power Cable
Meaning of the Status LED:
Status/LED Blinking
WiFi is not configured
LED in Blue
WiFi connection failed
3 English
Solid
Camera is starting up
WiFi connection succeeded
Set up the Camera
Wired Setup
It is recommended that the initial setup be completed with the Ethernet cable. You may follow the
steps below to set up your camera.
Step 1 Connect the camera to a LAN port on your router with an Ethernet cable.
Step 2 Use the power adapter provided to power on the camera.
Your Smart Device
Network Cable
Router
Camera
Power Adapter
Power Cable
English 4