Herunterladen Diese Seite drucken

Pepperl+Fuchs Tab-Ex 05 Betriebsanleitung Seite 22

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26
1
Pull out the tray gently from the tray slot.
2
Place an SD card on the tray with the gold-coloured contacts facing downwards and
gently press the SD card into the tray to secure it.
3
Insert the tray back into the tray slot.
Use only a microSD card.
Some SD cards may not be fully compatible with the device. Using an
incompatible card may damage the device, the SD card, or the data stored in it.
Use caution to insert the SD card right-side up.
When you remove the tray from the device, the mobile data connection will be
disabled. (Mobile network enabled models)
If the card is not fixed firmly into the tray, the SD card may leave or fall out of the tray.
If you insert the tray into your device while the tray is wet, your device may be
damaged. Always make sure the tray is dry.
Fully insert the tray into the tray slot to prevent liquid from entering your device.
The device supports the FAT and the exFAT file systems for SD cards.
When inserting a card formatted in a different file system, the device will ask to
reformat the card or will not recognise the card. To use the SD card, you must
format it. If your device cannot format or recognise the SD card, contact the SD
card manufacturer, a Samsung Service Centre or an authorised service centre.
Frequent writing and erasing of data shortens the lifespan of SD cards.
When inserting an SD card into the device, the SD card's file directory appears in
the My Files → SD card folder.
Removing the SD card
Before removing the SD card, first unmount it for safe removal.
1
Open Settings and tap Device care → Storage.
2
Swipe to the left to access the SD card page.
3
Tap → Unmount.
22

Werbung

loading

Diese Anleitung auch für:

Dz2