Huepar RL300HG Bedienungsanleitung Seite 7

CAUTION
LASER RADIATION
STARE INTO
DIRECTLY
OPTICAL
MAX OUTPUT
CLASS
COMPLIES WITH 21 CFR 1040.10 AND
User Guide, Maintenance and Care
• When not in use please power OFF the tool.
• The laser tool is sealed and calibrated at the plant to the accuracy
specified.
• It' s recommended to carry out an accuracy check before its first
use and periodic checks during future use especially for precise
layouts.
• Do not touch the glass window in case leaving any fingerprint on
the window, which may affect the performance of the laser.
• Do not store the laser tool in direct sunlight or expose it to high
temperatures. The housing and some internal parts are made of
plastics and may become deformed at high temperatures.
• Exterior plastic parts may be cleaned with a damp cloth, NEVER
use solvents. Use a soft, dry cloth to remove moisture from the tool
before storage.
• Store the tool in its case when not in use. If storing for extended
time, remove batteries before storage to prevent possible damage.
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.
• Please recycle in line with local provisions for the collection and
disposal of electrical and electronic waste under the WEEE
Directive.
- DO NOT
THE BEAM OR VIEW
WITH
INSTRUMENTS
@505nm-650nm
LASER PRODUCT
-4-