Safety Instructions - Huepar Rl300Hg Bedienungsanleitung

Safety Instructions

Before using this product, please read thoroughly and comply with
the Safety Instructions. Failure to read and follow may void the
warranty.
WARNING!
CLASS II LASER
COMPLIES WITH
Max. Power Output: < 1mW
Wavelength: 505nm-650nm
LASER RADIATION:
DO NOT STARE
DO NOT DIRECT
AVOID VIEW WITH
ATTENTION:
Read all instructions prior to operating this laser tool. Do not
remove any labels from tool.
• While the product is in operation, be careful not to expose your
eyes to emitting laser beam (Green/Red light source). Exposure to a
laser beam for an extended time may be hazardous for your eyes.
• Do not attempt to view the laser beam by optical tools such as
telescopes as serious eye injury may result.
• Do not disassemble or modify the laser in any way. Modifying the
tool may result in hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to
operate the laser. Serious eye injury may result.
• An exposure to the beam of a Class 2 laser is considered safe for a
maximum of 2 seconds. Eyelid reflexes will normally provide
adequate protection.
• The following label/print samples are placed on the product to
inform of the laser class for your convenience and safety.
PRODUCT
21 CFR 1040.10
INTO BEAM.
EYE EXPOSURE.
OPTICAL INSTRUMENTS.
AND 1040.11
-3
IECEN60B25-1•.2014