AutoAqua Smart AWC Lite Bedienungsanleitung Seite 7

Before starting
Connect power adaptor and test Smart AWC Lite by letting
the AWC perform one filling (for ATO)/ one manual water
change (for
dripping from the outlets once the pump stop .
*If water continues to drip after the pumps have stopped, that means
it is siphoning. Lower the water level in the corresponding reservoir,
or adjust the outlet tube higher.
If neither is an option, you can purchase AUTOAQUA Anti-Siphon
Valve(s) and connect
Calculating the Water Change Volume
The volume can be calculated by multiplying the width and length
of your tank and the distance between the pyramids of the two
sensors.**
For example, a tank is 10 inches in length and 10 inches in width. If
the distance between the two sensors is 3 inches, the water change
volume is approximately 1.3gallons.
Volume Formula
10" (L) X 10" (W) X 3" (H) = 300 cubic inches (around 1.3gallons)
Note : Suggested daily water change maximum 1.5gallons (5.7 liters).
** The water volume may be influenced by factors such as the speed of
return pump.
Width
the Smart AWC Lite
to make sure there is no water
it to the outlet
: LxWx H / 231 = Volume
Water Change H ight:3"
Volume
: 10"
tube(s).
in Gallons
Length : 10"
English