Controls; Standby; Gpi - Button/Switch Connection; Gpo - Led Connection - Db Technologies Ia3204 R Bedienungsanleitung

English

CONTROLS

STANDBY

Connecting a switch to put the amplifier in standby.
Contact closed => standby mode.

GPI - BUTTON/SWITCH CONNECTION

Connecting a button/switch powered by the IA3204R amplifier (on the left) or powered externally (on the right). It
is configured in the GPIO => Configure section of the AURORA NET software.

GPO - LED CONNECTION

Connecting a LED powered by the IA3204R amplifier (on the left) or powered externally (on the right). It is
configured in the GPIO => Configure section of the AURORA NET software.
IA3204R
Cod. 420120450 REV. 1.0
46