Setup - Db Technologies Ia3204 R Bedienungsanleitung

English

SETUP

The Setup window lets you choose the input type (from the drop-down menu), configure the amplifier outputs
and adjust the sine tone level. You can click the Configure button to load presets created by dBTechnologies (Out
Mode menu), and select the output mode from Stereo, Bridge or 70/100V. By default, bridge is disabled and the
output impedance is set to 4 Ohm. You can also identify the device by clicking IDENTIFY to turn on the front LEDs
at the same time, and rename it using the NAME command.
IA3204R Cod. 420120450 REV. 1.0
41