Werbung
LEDs
P1
P2
Fault
SYSTEM
Ring
R.O.
LINK/ACT
RJ45
1000
LINK/ACT
SFP
1000
Installation Requirements
Before you begin the installation, make sure that you have the
following:
Workstations running Windows XP/2003/Vista/7/8/10/2008, MAC OS X or later, Linux,
UNIX, or other platforms are compatible with TCP/IP protocols.
Workstations are installed with Ethernet NIC (Network Interface Card).
Ethernet Port Connection
Network cables - Use standard network (UTP) cables with RJ45 connectors.
The above PC is installed with Web browser.
4
Description
Status
Indicates the Switch has power.
Green
Indicates the Switch has power.
Green
Indicates power failure.
Green
Indicates that the ERPS Ring has been created
Green
successfully.
Indicates that Switch has been enabled to Ring
Green
Owner.
Indicates the link through that port is successfully
Light
established.
Green
Indicates that the Switch is actively sending or
Blink
receiving data over that port.
Indicates that the port is successfully connecting
Light
to the network at 1000Mbps.
Orange
Indicates that the port is successfully connecting
O
to the network at 10Mbps or 100Mbps.
Indicates the link through that port is successfully
Light
established.
Green
Indicates that the Switch is actively sending or
Blink
receiving data over that port.
Indicates that the port is successfully connecting
Light
to the network at 1000Mbps.
Orange
Indicates that the port is successfully connecting
O
to the network at 100Mbps.
Werbung
