Beemoo PRO MULTI2 Bedienungsanleitung Seite 3

ASSEMBLING AND FUNCTIONS
Note! All pictures shown are for illustration purpose only. Actual
product may vary due to product enhancement.
Install/Remove the Seat
1. Insert the seat unit moldings into the main housings of the chas-
sis until both the seat moldings click and locks into place. Pull
the seat to make sure it is fully engaged.
2. To remove the seat by pressing the buttons on both sides of the
seat and lift the seat upwards from the chassis.
1
Install/Remove the Bumper bar
1. To attach the bumper bar, insert its attachment points into openings
on seat section until you hear each side click into place.
2. To remove the bumper bar, press the release buttons on both sides
of the seat and pull the bumper bar out.
1
2
2
UK
3