Environment Protection - Exotek Instruments Mc-60Cpa Anleitung

Pinless Moisture Meters
Manual

ENViRONMENt PROtECtiON

According to the regulations for battery dispose, all
batteries must be returned to the trade or to battery
collecting points. You are not allowed to dispose batteries
through the household waste.
ONlY FOR EU COUNtRiES
Do not dispose of electrical tools together with household
waste material! In observance of European Directive
2002/96/ EC on waste electrical and electronic equipment
and its implementation in accordance with national law,
electric tools that have reach the end of their life must be
collected separately and returned to an environmentally
recycling facility.
SElECtiON OF PAPER OR CARDBOARD
GROUPS
Depending on the specific weight of the paper, different
groups of paper are applied. Group P3 is used for papers
of 80 gr. For lighter papers one should choose P2 or P1,
equivalently P4 – P6 for heavier paper qualities.
P1 = Filter paper, Tissue paper
P2 = Semi-chemical pulp, crepe paper, Test liner
P3 = Packaging paper, Fluting paper, 80 g/sqm
P4 = Kraft paper
P5 = Offset paper
P6 customer-specified calibration curves
To measure cardboard, the cardboard-groups C1 – C6
are chosen. Choose the groups from the equivalent
structures shown in the drawing beneath.
Note: Due to different contents and various measuring conditions, the neces-
sary calibration curve may deviate from the saved one. After the unit has been
switched on, the previous selected density is indicated in the display P1-P6 and
ENG
MC-60CPA
-  -