•
The two warming plates could be very hot during and after operation, please do not touch
them and only hold the glass container with its thermal insulated handle to avoid harmful to
your hands.
4. Operation
1) Before use, carefully check if the appliance is without damage. Contact your supplier if you
find damage or problem, and don't use the appliance.
2) Remove all packaging and protective material.
3) Place the appliance on a stable and level platform.
4) Leave sufficient space around the appliance for ventilation.
5) Place the paper filter in the funnel of the appliance.
6) Open the water entrance flip cover of the water reservoir.
7) Fulfil the glass container with cold water and pour into the empty water reservoir.
8) Close the cover and leave the appliance for 1 minute to let the air come out.
9) Place the glass container on the underneath the funnel after water filled.
10) Connect the power plug to power socket.
11) Add 80-95 grams of coffee powder into the paper filter and slide the funnel into position.
12) Switch the power ON, the control light indicator will turn on.
13) After a while, hot water starts dripping into the glass container.
14) When the "Indicator" light turns off, the brewing cycle is complete.
15) The lower hotplate will remain active when the brewing process is complete.
16) Remember to switch off the appliance if the glass container is picked up.
17) When lifting the glass container, be sure to hold it by the handle, as the hot surface is
harmful to your hands and you should avoid touching the hob.
EN