Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The contents of the document will be periodically updated or revised due to the product development. It is probably that there
are changes of document in the subsequent edition. Under no circumstances can this document replace the user manual and
the safety instructions on the product.
Please read the user manual and relevant standards and specifications carefully before performing any operation. You can get
the information by logging in Sungrow support platform via http://support.sungrowpower.com/ or scanning the QR code on the
side of the product or on the back cover of the quick installation instruction.
All operations shall only be performed by qualified personnel. Qualified personnel must be trained specially, read this instruction
thoroughly, master the safety instructions related to operation and be familiar with the local standards and safety regulations of
electrical system.
Before installing the equipment, check whether the goods are complete and consistent with the order, and whether there is
obvious damage according to the packing List. Contact the shipping company or SUNGROW directly in case of any damage or
incompleteness.
Cables used for the charger must be intact and well-insulated. Use insulation tools and wear personal protective equipment.
Violation of any of the above requirements may cause casualties or equipment damage.
Safety Statement
Failure to comply with the requirements of this document and the user manual may cause casualties or equipment damage, and
SUNGROW shall not assume any liability.
DANGER
In the TT, TN-C and TN-S system, make sure that the ground cable is connected reliably. Otherwise, it may cause electric
shock.
DANGER
High voltages are present during operation and could cause electrical shock, resulting in death, serious personal injury, or
property damage.
Non-professional personnel shall not disassemble the components.
CAUTION
Keep the charger away from flammable and explosive substances. Store it in a dry, clean, and well-ventilated place, free from
harmful gases. Do not store it near the corrosive objects.
NOTICE
During transport, the charger shall be securely packed in a wooden box, and marked with the loading direction. The charger
shall not be stored upside down.
During transport, tighten the equipment to avoid violent shaking and bumps that damage the package.
After the arrival of goods, check for transport damage and, if any, contact the shipping company or us.
Check if the devices inside the package are the same as that of the delivery list.
NOTICE
Type A residual-current device should be installed in the front stage of the charger. (Parameter: 25A/4P AC400V with a rated
residual current of 30 mA)
Werbung
