Werbung
Using Your Induction Hob
To start cooking
1. Touch the ON/OFF control for 3 seconds.
The hob will beep once and the zones will show "-" to
indicate that standby mode.
Note：If you do not select a cooking zone and power level within one minute, the
hob will switch off automatically.
2. Place a pan suitable for induction cooking on a cooking zone; ensure that the
base of the pan and the cooking surface is clean and dry.
3. Choose the zone using (A) "
within 5 seconds, "_"will be displayed.
4. Select the output using the power control (D) from 0-9 and cooking commences.
You can modify this at any time during cooking.
•
If you don't choose a heat setting within 1 minute, the induction hob will
automatically switch off.You will need to start again at step 1.
•
You can modify the heat setting at any time during cooking.
" and"0" will flash. If no power level is selected
10
Werbung
