Block CVR-200 AV Bedienungsanleitung Seite 44

Safe handling
▶ Disconnect the power plug from the power socket and remove the aerial cable from the device if you do not
use the device for a long time or when a thunderstorm is approaching.
▶ The net cable shall neither be wrapped around the device during operation nor in touch with hot surfaces.
▶ Avoid humidity to enter the housing.
▶ Never touch the device, the net cable or the net plug with wet hands. There is a risk of an electric shock.
Should an item or liquid get into the housing, immediately disconnect the device from the power supply.
▶ Have your equipment inspected by qualified personnel before restarting it. Otherwise there is the danger
of electric shock.
▶ Never use the device if it is damaged, or if there is any damage to the net cable or the plugs. In case the
device is damaged, immediately pull the plug from the socket.
▶ Never open the device. In case of malfunction, please contact our service centre or any other specialized
shop.
▶ The remote control has an infrared diode Class 1. Do not look at the LED with optical devices.
Remove the device from the power
if it is not used for a long time!
44
Make sure that no sprays or chemi-
cals get to your device!
Make sure that your device is not
covered!
Make sure that the device is only
opened by authorized persons!