Seite 1
Bedienungsanleitung | Manual CVR-200 AV...
Seite 2
Sehr geehrter Kunde! Danke, dass Sie sich für dieses hochwer tige sere Webseite „www.audioblock.com“, um zu Gerät entschieden haben. Diese Bedienungs- prüfen, ob es neuere Bedienungsanleitungen anleitung soll Ihnen eine Übersicht darüber zum Download gibt. Vergleichen Sie hierzu die geben, wie Sie Ihr Gerät bedienen können. Sie Standangabe auf dem Deckblatt mit der Anga- erhalten Sicherheitsinformationen und werden be im Internet.
Seite 3
INHALTSVERZEICHNIS Sicherheitshinweise ................................... 04 Vor der Inbetriebnahme ................................08 Bedienelemente am Gerät ..............................08/09 Die Fernbedienung ..................................10 Anschlüsse am Gerät ................................. 11 Aufbau des Gerätes ..................................12 Erste Inbetriebnahme und Installation ..........................13 Manuelle Installation (WLAN) ..............................14 Der Verstärker, Multikanal ................................ 15 Das UKW Radio ....................................
Seite 4
Sicherheitshinweise Achtung: Um die Gefahr eines Stromschlages zu vermeiden, darf an diesem Gerät keine Veränderung vorgenom- men werden! Das Öffnen des Gerätes sowie Veränderungen am Gerät dürfen nur durch autorisierte Personen vorgenommen werden. Wichtige Sicherheitshinweise: ▶ Bitte lesen Sie vor der ersten Inbetriebnahme diese Bedienungsanleitung sorgfältig durch. Dieses Gerät ist nur für den Gebrauch in geschlossenen Räumen.
Seite 5
Umgang mit Batterien Batterien können brennbare Stoffe enthalten. Bei unsachgemäßer Behandlung können Batterien auslaufen, sich stark erhitzen, entzünden oder gar explodieren, was Schäden für Ihr Gerät und Ihre Gesundheit zur Folge haben könnte. Befolgen Sie folgende Hinweise: ▶ Halten Sie Kinder von Batterien fern. ▶...
Seite 6
Sicherer Gebrauch Elektrogeräte nicht in Kinderhand! Lassen Sie Kinder niemals unbeaufsichtigt elektrische Geräte benutzen. Halten Sie auch die Verpackungsfolien von Kindern fern. Es besteht Erstickungsgefahr. Sicheres Aufstellen ▶ Verwenden Sie das Gerät ausschließlich in trockenen Räumen. ▶ Wenn Sie das Gerät von einer kalten in eine warme Umgebung bringen, kann sich im Inneren des Gerätes Feuchtigkeit niederschlagen.
Seite 7
Sicherer Gebrauch ▶ Ziehen Sie den Netzstecker aus der Steckdose und entfernen Sie das Antennenkabel vom Gerät, wenn Sie das Gerät längere Zeit nicht benutzen oder wenn sich ein Gewitter nähert. ▶ Das Netzkabel darf während des Betriebs nicht um das Gerät gewickelt sein oder heiße Oberflächen be- rühren.
Seite 8
Vor der Inbetriebnahme • Bevor Sie Ihr Internetradio, die Streamingfunktionalität oder die Bedienung per Smar tphone- App nutzen können, benötigen Sie: • Einen schnellen Internetzugang. • Einen Router mit WL AN (kabelloser Zugriffspunkt). • Wenn Ihr kabelloses Netzwerk auf Wired Equivalent Privacy (WEP) oder auf Wi-Fi Protected Ac- cess (WPA) eingestellt ist, benötigen Sie den WEP oder WPA Code, damit Ihr Internet Radio mit dem Router Daten austauschen kann.
Seite 9
BEDIENELEMENTE AM GERÄT Farbdisplay. „Pre-Out On“ im Display erscheint. DSP Mode: Zum Auswählen eines DSP Modus. Taste „Wiedergabe/Pause“: Nach einfachem Taste „DISC“: Wirft CD/Blu-ray/DVD aus. Beim Drücken geht das Gerät auf Pause, nach noch- ersten Drücken dieser Taste wechselt das Gerät maligem Drücken wird die Wiedergabe fortge- in die Betriebsart „DISC-Player“.
Seite 10
DIE FERNBEDIENUNG Taste „Standby“: Schaltet das Gerät in den „Clock“ Modus, im Display werden Uhrzeit und Datum ange- zeigt. Schalten Sie das Gerät am Netzschalter aus, um Energie zu sparen. Taste „Mute“: Schaltet den Ton aus oder wieder ein. Taste „A/B“: Wählen Sie durch mehrfaches Drücken ein Kanalpaar aus und verändern Sie die Lautstär- keparameter +/- 10 mit Hilfe der Tasten 16/17.
Seite 11
ANSCHLÜSSE AM GERÄT Netzanschluss: Das Netzanschlusskabel darf Rec-Out Buchsen: Zum Anschluss eines Aufnah- keine Beschädigungen oder Defekte aufweisen. megerätes. Surround Lautsprechanschluss hinten rechts*. AUX 1 Eingangsbuchse: Zum Anschluss eines zu- Surround Lautsprechanschluss hinten links*. sätzlichen Gerätes. Surround Lautsprechanschluss mitte rechts*. AUX 2 Eingangsbuchse: Zum Anschluss eines zu- Surround Lautsprechanschluss hinten links*.
Seite 12
Lautstärke- oder Tonregelung des CVR-200 AV weiter. ▶ Wenn Sie einen weiteren (End-) Verstärker am CVR-200 AV benutzen möchten, schließen Sie diesen bitte an die Pre-Out Buchsen des CVR-200 AV an. Dieser Ausgang gibt das vom CVR-200 AV in Lautstärke und Tonregelung beeinflusste Signal weiter.
Seite 13
Nachdem Sie Ihr Gerät sicher aufgestellt und alle Verkabelungen vorgenommen haben, können Sie Ihren CVR-200 AV nun das erste Mal einschalten. Halten Sie bitte für eine eventuelle WLAN Installation Ihr Passwort (Netzwerkschlüssel) und gegebenenfalls Ihre Netzwerkkennung (SSID) bereit. Nach dem Einschalten startet der CVR-200 AV mit dem Einrichtungsassistenten.
Seite 14
▶ Geben Sie nun das Passwort Ihres WLAN-Netzwerkes ein, achten Sie auf korrekte Schreibweise und Groß-/ Kleinschreibung. Bestätigen Sie mit „Enter“. ▶ Der Router und Ihr CVR-200 AV sollten nun verbunden sein und ein Internetzugang bestehen,das Gerät zeigt die Anzeige „Verbunden“.
Seite 15
DER VERSTÄRKER Der CVR-200 AV ist mit einem hochwertigen Class-AB Verstärker mit einer Leistung von 7 x 100 Watt an 4 Ohm (RMS) ausgestattet. Multikanal: Der CVR-200 AV verfügt über 5 unterschiedliche Multikanäle. Diese sind Hifi 2.0 CH, Multi 2.1 CH, Multi 3.1 CH, Multi 5.1 CH und Multi 7.1 CH.
Seite 16
Die Zeichnung dient als Beispiel zum Aufstellen der Lautsprecher. Schließen Sie hier für am CVR-200 AV die Lautsprecher Front Left (FL), Front Rigth (FR) und den Subwoofer (SW), wie auf Bild 2 angezeigt an. Bitte achten Sie auf den richtigen Anschluss von plus und minus!
Seite 17
Dialoge gut hörbar wiedergeben. Die Zeichnung dient als Beispiel zum Aufstellen der Lautsprecher. Schließen Sie hier für am CVR-200 AV die Lautsprecher Front Left (FL), Front Rigth (FR), Center (C) und den Subwoofer (SW), wie auf Bild 2 angezeigt, an. Bitte achten Sie auf den richtigen Anschluss von plus und...
Seite 18
Multi 5.1 Kanal Dieser Kanal empfihelt sich für Filme. Es wird ein räumliches Klangbild erzeugt. Schließen Sie die Lautsprecher Front Left (FL), Front Rigth (FR), Center (C), Surround Speaker Left (SL), Surround Speaker Rigth (SR) und den Subwoofer (SW), wie auf dem Bild angezigt, an. Um einen optimalen Klang zu erhalten, stellen Sie die hinteren Lautsprecher (SL/SR) in einem 10 bis 30 Grad Winkel auf.
Seite 19
Multi 7.1 Kanal Dieser Kanal empfihelt sich für Filme. Es wird ein intensives räumliches Klangbild erzeugt. Schlie- ßen Sie die Lautsprecher Front Left (FL), Front Rigth (FR), Center (C), Surround Speaker Left (SL), Surround Speaker Rigth (SR), Surround Back Speaker Left (SBL), Surround Back Speaker Rigth (SBR) und den Subwoofer (SW), wie auf dem Bild angezeigt, an.
Seite 20
Mit den Tasten „VOL+“ und “VOL-“ auf Ihrer Fernbedienung oder am Gerät mit dem Multifunktionsdrehknopf können Sie die Gesamtlautstärke des CVR-200 AV verändern. Bitte beachten Sie, dass bei verschiedenen Signal- quellen bei gleicher Lautstärkeeinstellung am CVR-200 AV unterschiedliche Raumlautstärken auftreten können.
Seite 21
DAS UKW RADIO (FM Radio) Sie können Ihr UKW-Radio sowohl mit der beiliegenden Kombiantenne für UKW- und DAB+ Empfang, als auch mit einer Hausantenne nutzen. Das UKW-Radio können Sie entweder mit der Fernbedienung über die Taste „FM“ direkt oder mit der Taste „Source“ über das Auswahlmenü am Gerät aktivieren. Erstes Einrichten: ▶...
Seite 22
DAS DAB+ RADIO Sie können Ihr DAB+ Radio sowohl mit der beiliegenden Kombiantenne für UKW- und DAB+ Empfang, als auch mit einer Hausantenne betreiben. Ein Anschluss an das Kabelnetz ist nicht möglich. Das DAB+ Radio können Sie entweder mit der Fernbedienung direkt über die Taste „DAB“ oder mit der Taste „Source“ über das Auswahl- menü...
Seite 23
Das Internetradio Wenn Sie Ihren CVR-200 AV an das Internet angeschlossen haben, können Sie ohne weitere Einstellungen Inter- netradio empfangen. Ihr Internetradio verbindet sich vollautomatisch mit einer der größten Datenbanken für Internetsender, in der weit über 40.000 Sender und über 100.000 Podcasts weltweit gelistet sind.
Seite 24
Wählen Sie aus dem angezeigten Menü „USB Abspielen“ aus, um Musik von Ihrem eingesteckten Speicherme- dium abzuspielen. Der CVR-200 AV stellt Ihnen den Inhalt des Mediums auf dem Display dar. Innerhalb der Liste können Sie mit Hilfe der Pfeiltasten auf Ihrer Fernbedienung navigieren und die gewünschten Titel oder Ordner mit „Enter“...
Seite 25
- Wählen Sie nun unter den Quellen einen der gewünschten Streamingdienste aus. Deezer Verbinden Sie den CVR-200 AV mit Ihrem persönlichen Deezerkonto. Sie loggen sich dazu ganz einfach über das Display vom CVR-200 AV ein oder über die Oktiv App.
Seite 26
App steuerbar sind angezeigt. ▶ Bitte wählen Sie Ihren CVR-200 AV aus den gefundenen Geräten aus. ▶ Ihr CVR-200 AV ist nun mit der App „Oktiv“ verbunden und Sie können das Gerät fernbedienen: *Für weitere Funktionen der App besuchen Sie: https://support.oktiv.app/portal/de/home Eine Anleitug zur Oktiv App finden Sie auf www.audioblock.com...
Seite 27
Sie hierzu Ihren Kopfhörer in den Pairingmodus. Drücken Sie auf dem Gerät die Taste „BT Headphone Pairing“ , nun schaltet Ihr CVR-200 AV in diesen Modus. Wenn noch kein Kopfhörer verbunden ist, blinkt die blaue LED. Anschließend drücken Sie die Taste erneut. In diesem Modus verbindet sich der CVR-200 AV automatisch mit Ihrem Kopfhörer (die Verbindung erfolgt nach ca.
Seite 28
Sie die Bedienungsanleitung des externen Gerätes für den Anschluss zu Rate. Bitte schließen Sie ein gegebenenfalls vorhandenes Erdungskabel an den Plattenspieler und den CVR-200 AV an um ein Brummen zu verhindern. Ein geeig- netes Plattenspieler-Cinch-Kabel mit Erdung erhalten Sie im Zubehörhandel.
Seite 29
Der rückwärtige Rec-Out Ausgang sendet elektrische Hochpegel-Audiosignale in analoger Form. Diese Signale werden in Klang und Lautstärke nicht von den getroffenen Einstellungen am CVR-200 AV verändert, sondern unverändert von der jeweiligen Signalquelle weitergegeben. Dieser Ausgang ist besonders geeignet für ein Auf- nahmegerät wie Tonband oder Kassettenrekorder.
Seite 30
DISC Modus Blu-ray-player Hier finden Sie eine Kurzanleitung zu Ihrer ersten Inbetriebnahme des Blu-ray-Players. 1. Verbinden Sie den CVR-200 AV mit dem Strom und schließen Sie den Einrichtungsassistenten ab. 2. Verbinden Sie den CVR-200 AV mit Ihrem TV-Gerät. 3. Starten Sie nun den Blu-ray Player. Sie können über die Fernbedienung über die Auswahltaste „Disc“...
Seite 31
Die Fernbedienung im Blu-ray modus Beachten Sie, dass sich die Tastenbelegung im Blu-ray Modus durch das betätigen der DISC Taste umstellt (Display zeigt Blu-ray Remote an). Die Funktionen sind nun an den Blu-ray-Player angepasst, die Bezeichnungen über den Tasten sind aktiviert. Bitte beachten Sie, dass einige Funktionen der Auswahltasten abhängig von der eingelegten Disc sind.
Seite 32
Setup Menü Um das Setup Menü öffnen zu können, stoppen Sie bitte die Blu-ray oder entfernen diese aus dem Laufwerk. Drücken Sie nun die Taste „Setup“ auf der Fernbedienung. Das Menü baut sich in den Oberpunkten „Allgemeine Einstellungen“, Anzeige Einstellungen“, „Audio-Einstellungen“ und „Systeminfomationen“ auf. Allgemeine Einstellungen System 1.
Seite 33
Wiedergabe 1. Untertitel: Schalten Sie Untertitel ein oder aus. 2. Kamerawinkel: Auswahl von unterschiedlichen Kamerawinkeln, wenn dieses von der Blu-ray unterstützt wird. 3. Bild in Bild Anzeige: Diese Funktion ermöglicht neben dem laufenden Film zusätzlich Autorenkommentare ab- zuspielen. 4. Zweittonauswahl: Diese Funktion ermöglicht neben dem laufenden Film eine zusätzliche Tonspur abzuspielen. 5.
Seite 34
4. Dolby DRC: Legen Sie den Dynamikumfang fest. Dadurch werden Lautstärkepegel erhöht und reduziert. Lautsprecher 1. Konfiguration 2. Testton: Diese Funktion ist nur relevant, wenn Sie anstelle des CVR-200 AV ein anderes Gerät zur Tonwieder- gabe (TV) nutzen. Systeminformationen Hier wird die Software Version angezeigt.
Seite 35
Einrichtungsassistenten. Software Update: Der CVR-200 AV prüft regelmäßig, ob ein Update im Internet zur Verfügung steht und weist Sie darauf hin. Sie können dann wählen, ob das Update ausgeführt werden soll. Sie können diese Funktion hier abstellen (nicht empfohlen) oder die Betriebssoftware auf Aktualität prüfen.
Seite 36
Wenn nicht, bitte umcodieren. Netzwerk Error Falsche Informationen werden vom Netzwerk Die Daten vom Server sind nicht lesbar, eventuell empfangen Neustart von CVR-200 AV und Router. Netzwerk nicht Probleme mit der Verbindung zum Router Router einschalten oder neu starten. verfügbar Netzwerk Keine Antwort unabhängig vom Netzwerk...
Seite 37
Fehlermeldungen und Problembehebung (Allgemein) Fehlerbeschreibung Mögliche Ursache und Behebung Kein Strom, obwohl das Gerät - Das Stromkabel ist nicht angeschlossen. angeschaltet ist - Die Steckdose ist defekt. - Die Sicherung im Gerät ist defekt – Fehler muss durch einen Techniker repariert werden. - Das Stromkabel ist defekt.
Seite 38
Pflege und Transport Pflege und Reinigung des Gerätes Nehmen Sie das Gerät, bevor Sie es reinigen, vom Strom. Benutzen Sie nur saubere und trockene Lappen, um ihr Gerät zu reinigen. Wenn das Gerät sehr stark verschmutzt ist, können Sie das Gerät mit einem handfeuchten Lappen und mit milder Reinigungsflüssigkeit reinigen.
Seite 39
Dear Costumer, Thank you for choosing to purchase this high downloading. For this purpose, compare the quality device. This manual shall give you an status on the cover page with the information over view of how to operate your device. You on the Internet.
Seite 40
Contents Safety instructions ..................................41 Before operating ..................................45 Operating elements on the device ............................46 The remote control ..................................47 Connections to the device ............................... 48 First commissioning and installation ............................ 50 Manual installation (WIFI) ................................. 51 The amplifier ....................................52 The FM radio ....................................
Seite 41
Safety instructions Caution: to avoid the risk of electric shock, do not modify this device! The opening of the device as well as chan- ges in the appliance may only be carried out by authorized personnel. Important security instructions: ▶ Before using the device for the first time, please thoroughly read the operating instructions. ▶...
Seite 42
Handling batteries Batteries may contain flammable substances. Improper handling can cause batteries to leak, strongly heat, ignite, or even explode, which could damage your device and your health. Follow these instructions: ▶ Keep children away from batteries. ▶ In case batteries have been swallowed, report this to your doctor immediately. ▶...
Seite 43
Safe use Do not let electrical appliances in children‘s hands! Never let children unattended to use electrical devices .Also keep the Packaging foils far away from children. There is a severe danger of suffocation. Safe positioning ▶ Exclusively use the device in dry rooms. ▶...
Seite 44
Safe handling ▶ Disconnect the power plug from the power socket and remove the aerial cable from the device if you do not use the device for a long time or when a thunderstorm is approaching. ▶ The net cable shall neither be wrapped around the device during operation nor in touch with hot surfaces. ▶...
Seite 45
Before operating Before you can use your internet radio, streaming functionality or using a smartphone app, you will need: • A quick Internet access. • A router with WIFI (wireless access point). • If your wireless network is set to Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA), you will need the WEP or WPA code, so that your Internet radio can exchange data with the router.
Seite 46
Operating elements on the device Colour display. „Play/Pause“ Button: The device pauses when „DSP Mode“: Lets you choose a DSP Mode the button is pressed once. Pressing it again will „Disc (Arrow Up)“: Pressing it will start the CD/ resume play. Pressing it for 5 seconds will turn DVD/BluRay player.
Seite 47
The remote control „Standby“ button: switches the device to „Clock“ mode, the display will show the time and the date. To save energy, switch off the device via net counter. „Mute“ button: mutes the device. “A/B” button: choose a station by pressing it multiple times. You can change the frequency (+/-10 db) by using the Vol+ / Vol- button respectively.
Seite 48
Connections on the device Mains connection: the mains connection cable RecOut output: connect any recording device. may show no damages or defects. AUX 1 jack: connect an additional device. Surround speaker input back right* AUX 2 jack: connect an additional device. Surround speaker input back left* Phono input jack: connect a record player with Surround speaker input mid right*...
Seite 49
You can connect the CVR-200 AV with up to 7 speakers. If you want to use more than two speakers however, make sure that every speaker has at least 8 Ohms.
Seite 50
▷ No sufficient WIFI signal where the device is placed. (Perhaps readjusting the antennas on the router and the CVR-200 AV or using another WIFI repeater can fix the issue.) ▷ If WIFI-SSID is surpressed on your router, navigate to „Configure manually“.
Seite 51
* Should you have disconnected the DHPC function on you router, select please “DHPC inactive”. In this case, you must configure the Network, the rules and specification should be known by now. For the configuration, you may need the MAC address of your Block device. You can find this under Menu/...
Seite 52
The amplifier The CVR-200 AV is equipped with a high-quality AB class amplifier with an output of 7 x 100 watts to 4 ohms (RMS). Multi-Channel: The CVR-200 AV utilizes 5 different multi-channels. They are the following: Hifi 2.0, Multi 2.1, Multi 3.1, Multi 5.1 and Multi 7.1. To choose a multi-channel, either use the „DSP“...
Seite 53
multi 2.1 This option adds a subwoofer to the mix. The subwoofer supports the speakers in deep frequencies. The following sketch shows an example of how to place the loudspeakers. Connect your speakers to the Front Left and Front Right (FL / FR) jack and your subwoofer to the SW-Out, as shown below. Remember to connect the plus and minus poles correctly.
Seite 54
multi 3.1 This channel is recommended for movies and epic vocal performances. The central speaker allows voices to be transmitted loud and clear. The following sketch shows an example of how to place the loudspeakers. Connect your speakers to the Front Left and Front Right (FL / FR) jack, the subwoofer to the SW-Out as well as your center speaker to the corresponding jack, as shown below.
Seite 55
Multi 5.1 This channel is used for surround sound and therefore especially recommended for movies. This setup exerts a room-filling sound sensation. The following sketch shows an example of how to place the loudspeakers. Connect your speakers to the Front Left and Front Right (FL / FR) jack Center (C), the newly added Surround speakers left (SL) and right(SR) and your subwoofer to the SW-Out, as shown below.
Seite 56
multi 7.1 Generates a realistic, spatial sound experience for movies. The following sketch shows an example of how to place the loudspeakers. Connect the speakers Front Left, (FL), Front Right (FR), Center (C), Surround Left (SL), Surround Right (SR), Surround Back Left (SBL), Surround Back Right (SBR) and the Subwoofer (SW), as shown below.
Seite 57
Please note that for different signal sources, the volume of the CVR-200 AV can vary. This is not a defect but is caused by different input levels of the connected signal sources. You can customize the volume controls by +/- 10 db separately.
Seite 58
The FM radio You can enjoy your FM radio with the supplied FM and DAB + reception combination antenna, as well as with a house antenna. You can activate the FM radio by pressing the „FM“ key on the remote, as well as pressing “Sour- ce”...
Seite 59
The DAB + radio You can operate your DAB + radio with the enclosed combination aerial for FM and DAB + reception as well as with a house antenna. A connection to the cable network is not possible. You can activate the DAB + radio with the remote control, „DAB“...
Seite 60
▶ Just as described in FM or DAB + function, you can also save stations to the remote control‘s number block. Up to 40 stations can be saved, while spot 1-10 can be easily accessed by the number pad on the remote, pressing „P“...
Seite 61
The Media Player (USB 2 Back Port) USB port on the back of the CVR-200 AV is suitable for playback of image and video formats. The device has to be connected to your TV because the menu navigation is shown on there. To play data via this port, your CVR-200 AV has to be connected to the TV.
Seite 62
Streaming - Your smartphone or tablet should be connected to the same WiFi network as the CVR-200 AV. - Now select your favorite streaming service on the source menu. Deezer Connect the CVR-200 AV to your personal Deezer account. Use the display of the CVR-200 AV to login, or connect your device to the Oktiv App and start it from there.
Seite 63
Play-Store® and search for the term oktiv“. Install the found free app on your device. Important: To operate your CVR-200 AV, the Smartphone / Tablet and the device must be registered in the same WIFI network and the CVR- 200 AV must be switched on! ▶...
Seite 64
Adapting external Remote controls Your CVR-200 AV can learn the codes from other remote controls, e.g. from a TV remote control (only possible with infrared remotes). Proceed as follows: ▶ Press the „Menu“ button on the device for 3 seconds for it to go into learning mode.
Seite 65
The optical connections The rear optical connections of the CVR-200 AV (also S / PDIF® or TOSLINK®) process stereo light wave signals in digital form. These connections are particularly suitable for external CD players, data recorders or many modern televisions. On most televisions, the optical audio output on the TV menu must first be activated. For the con- nection, please consult the operating instruction of the external device.
Seite 66
Press „TV“ on your remote control repeatedly, until TV(ARC) is displayed. The Audio back channel is now activa- ted. Through this, the TV‘s sound is transmitted to the CVR-200 AV and you can enjoy your media through the device. In disc mode or USB 2 mode, the menu and further settings/information will be isplayed on the device.
Seite 67
Short Manual Disc Mode Blu-ray Player This is a short manual for the first commissioning of your new Blu-ray Player. 1. Connect your CVR-200 AV to the mains and finish the setup wizard. 2. Connect CVR-200 AV with your TV.
Seite 68
The remote control in blu-ray mode Note that button assingments change in Blu-ray mode by pressing the „DISC“ button. (Display visualizes Blu-ray Remote) The functions are now adapted to the Blu-ray player and therefore the description above the keys are activated.
Seite 69
blu-ray Setup Menu To open the setup menu, stop and then eject the Blu-Ray. Press „Setup“ on the remote control afterwards. „Gene- ral Settings“, „Display Settings“, „Audio Settings“ and „System Information“ will be displayed. General settings System: 1. Switch the screensaver on and off. 2.
Seite 70
4. Dolby DRC: Set a dynamic range. This allows the volume range to raise or lower. Loudspeakers 1. Configuration 2. Test Sound: This function is only relevant if you use another sound source than your CVR-200 AV. It plays a sound on the other device, if connected correctly. System Information...
Seite 71
System settings Press the „Menu“ button on your remote control or on the device and select the „System settings“. In the fol- lowing menu you carry out the following settings: Internet settings: In this menu, you can change the settings you have made for your Internet connection, e.g. when you change the location.
Seite 72
Choose the „Snooze“ function and confirm with „Enter“. „Snooze Off“ will then be displayed. You can navigate through the options with the arrow keys on your remote and decide after which time the CVR-200 AV is sche- duled to go into Standby.
Seite 73
Error Messages and General Troubleshooting Error Description Possible cause and remedy No power even though the - The power cable is not connected unit is on - The socket is defective - The fuse in the device is defective - Fault must be repaired by a technician - The power cable is defective No sound - The unit is not on at all...
Seite 74
Care and transport Care and cleaning of the device Before you clean it, disconnect it from the power supply. Use only clean and dry cloths to clean your device. If the appliance is very dirty, you can clean it with a damp cloth and mild cleaning fluid. Never use liquids such as gasoline, alcohol, petroleum or other solvents.
Seite 75
Audioblock GmbH Auf der Striepe 3a | 27798 Hude Tel.: +49 (0) 44 84 - 920 090 10 | E-Mail: block@audioblock.com www.audioblock.com...