Werbung
Verfügbare Sprachen
Verfügbare Sprachen
S 9101 / SH9101
• For example, if the current weather is cloudy and the rain symbol is displayed, it does not mean the product is faulty
because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but
not necessarily rainy. The accuracy is about 70 to 75%.
• The sun symbol also appears at night if there is a starry night.
Note: Please note that the forecast symbol will become more defined in the course of operation. The
forecast symbol is active right from the start, however, the reliability of the forecasts increases with the
amount of data collected. The sensor must adapt initially to the reference level at the site.
Thermometer and hygrometer
• If the measure values above the range,then temperature display "HH.H",humidity display "HH%".
• If the measure values below the range,then temperature display "LL.L",humidity display "LL%".
Maximum/Minimum function
• Press the MEM button in normal mode.
• MAX appears on the display.
• You can now get the highest values for the indoor temperature and humidity and outdoor temperature since the last
reset.
• Press the MEM button again.
• MIN appears on the display.
• You can now get the lowest values for the indoor temperature and humidity and outdoor temperature since the last
reset.
• Press the MEM button once more, to go back to the present values display.
• The device will automatically quit the MAX/MIN mode if no button is pressed.
• Press and hold the MEM button for two seconds while the maximum or minimum values are displayed to clear the
recorded readings.
Setting of the temperature unit
• In the normal mode you can change between °C (Celsius) or °F (Fahrenheit) as temperature unit.
• Press the
button.
D. TROUBLESHOOTING
Werbung
