CAPTELEC GRAPHITE Bedienungsanleitung Seite 24

S 9101 / SH9101
• During night-time, the atmospheric interference is usually less severe and reception is possible in most cases.A single
daily reception is adequate to keep the accuracy deviation under 1 second.
Operation
• During the operation, all successful settings will be confirmed by a brief beep tone.
• The device will automatically quit the setting mode if no button is pressed for a long period of time.
• Press and hold the
Manual Date and time setting
- Hold the SET button in normal mode for three seconds, to enter the setting mode.
AL SET
- The setting sequence is shown as follows: Time Zone - 12 or 24 hours system (24H default)- Hour - Minute - Year -
Month - Day - Language of week .
- Press the
- Press and hold the
- Confirm the setting with the SET button or no button pressed in 15 seconds.
- The manually set time will be overwritten by the DCF time when the signal is received successfully.
Setting of the time zone
- In the setting mode you can make the time zone correction (-1 , 0 , +1).
- The time zone correction is needed for countries where the DCF signal can be received.
Setting of the 12 and 24 hours display
- In the setting mode you can choose between the 12 - and 24 hour system.
- In the 12 HR system AM or PM (after 12 o'clock) appears on the display.
Setting of the alarm time
- Press the SET button into ALARM mode, "ALARM" words display , and 6:00 AM default.
AL SET
- When display "ALARM" ,press / CH or / RCC button to turn on or turn off alarm ,if the icon display on the screen ,
it mean alarm function turn on.Hold the SET button for 3 seconds to set alarm time.
- The setting sequence is shown as follows: Hour - Minute.
- Press the
- Press and hold the
- Confirm the setting with the SET button or no button pressed in 15 seconds.
- When the adjusted alarm time is reached, the alarm will ring. The alarm symbol will be flashing.
- If no any button pressed,the alarm will be stopped after 2 minutes and alarm symbol stop flashing.
- If press any button then the alarm will stop and alarm symbol stop flashing.
Backlight
• If power from batteries, press any button the back light will turn on 8 seconds then auto off.
• If power from micro-usb, the back light will always on except DCF scan signal or turn it off from
button.
• When power from micro-usb, hold button 3 seconds, then turn off the back light, press any buttons will auto on the back
light 8 seconds, after that then auto off the back light. Hold button 3 seconds again, the back light will always on again.
Display of pressure
• In the normal mode press BARO button, the value of pressure will display on time position, and the unit is HPA, press
again , back to display time.
• Hold BARO button for 3 seconds , the value of pressure will blinking, press or buttons to adjust the value, press BARO for
confirm.
Weather forecast
The weather station has five different weather symbols(sunny,slightly cloudy,cloudy,rainy and stormy).
• The weather forecast relates to a range of 12 hours and indicates only a general weather trend. The accuracy is about
70 %.
or button in the setting mode for fast running.
/ CH or / RCC button to increase or decrease for setting.
/ CH or / RCC button for fast running.
AL SET
/ CH or / RCC button to increase or decrease for setting.
/ CH or / RCC button for fast running.
AL SET
AL SET