Eigenschaften - Teltonika Rut241 Bedienungsanleitung

EIGENSCHAFTEN

MOBIL
Mobile module
Status
SMS
Black/White list
Band management
APN
Bridge
Passthrough
Multiple PDN (optional)
DRAHTLOS
Wireless mode
WiFi security
SSID
WiFi users
Wireless Hotspot
ETHERNET
WAN
LAN
NETZWERK
Routing
Network protocols
VoIP passthrough support
Connection monitoring
Firewall
DHCP
QoS / Smart Queue
Management (SQM)
DDNS
Network backup
Load balancing
SSHFS (optional)
SICHERHEIT
Authentication
Firewall
Attack prevention
VLAN
Mobile quota control
WEB filter
Access control
Copyright © 2022, TELTONIKA NETWORKS. Die in diesem Dokument enthaltenen Angaben und Informationen können von TELTONIKA NETWORKS ohne vorherige Ankündigung geändert werden.
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS,
scheduled SMS, SMS autoreply, SMPP
Operator black/white list
Band lock, Used band status display
Auto APN
Direct connection (bridge) between mobile ISP and device on LAN
Router assigns its mobile WAN IP address to another device on LAN
Possibility to use different PDNs for multiple network access and services (not available in standard FW)
IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID stealth mode and access control based on MAC address
Up to 50 simultaneous connections
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto
MDI/MDIX
1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet
client, SNMP, MQTT, Wake On Lan (WOL)
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Port forward, traffic rules, custom rules
Static and dynamic IP allocation, DHCP Relay, Relayd
Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service,
protocol or port, WMM, 802.11e
Supported >25 service providers, others can be configured manually
VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Balance your internet traffic over multiple WAN connections
Possibility to mount remote file system via SSH protocol (not available in standard FW)
Pre-shared key, digital certificates, X.509 certificates
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN,
SYN-RST, X-mas, NULL flags, FIN scan attacks)
Port and tag based VLAN separation
Set up custom data limits for the SIM card
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Flexible access control of TCP, UDP, ICMP packets, MAC address filter
DATENBLATT // RUT241
3