Werbung
C / F
15
16
17
18
15.°C /°F :
- Passe du mode d'affichage en °C au mode °F.
16.mb/hPa . inHg :
- Passe du mode mb/hPa au mode inHg.
17.RESET :
- Appuyer pour remettre toutes les valeurs aux valeurs
d'usine.
- En cas de mauvais fonctionnement, l'unité peut devoir
être réglée à nouveau.
18.SUPPORT DE TABLE
- A utiliser pour le poser sur un bureau.
19.SUPPORT MURAL
- A utiliser pour accrocher l'unité principale au mur.
20.Compartiment à piles :
- pour des 3 piles de taille AAA
57
19
mb-hPa
R E S E T
inHg
20
If the readings go above or below the operating range, the
receiver will keep showing the last record within the
operation range.
NOTE:
1.
If no signals are received or the transmission is
interfered, "---" will appear on the LCD.
2.
Relocate the clock or transmitter in other positions and
make sure the transmission is within the effective
range of 30 meters approx.
3.
After several trials in vain, please reset the clock
thoroughly. Try out where your multifunctional alarm
clock receives the signals best.
CHECKING AND DELETING MAX. /MIN. TEMPERATURE &
HUMIDITY RECORDS
1.
Press the "MAX/MIN" key once to check the maximum
temperature and humidity records. Press it twice to
check the minimum records. Press it again to exit.
2.
Press and hold the "MAX/MIN" key for 3 seconds to
delete the maximum and minimum temperature &
humidity records.
Max. Temp. & Humidity records
42
Min. Temp. & Humidity records
Werbung
