IMPORTANT INFORMATION REGARDING
ELECTROMAGNETIC COMPATIBILITY (EMC)
• This device should not be used adjacent to or stacked with other
equipment and that if adjacent or stacked use is necessary, this de-
vice should be observed to verify normal operation in the configura-
tion in which it will be used.
• Use of accessories,detachable parts and materials other than those
specified or provided by the manufacturer of this device could result
o
in increased electromagnetic emissions or decreased electromagnet-
ic immunity of this equipment and result in improper operation.
• Portable RF communications equipment (including peripherals such
as antenna cables and external antennas) should be used no closer
than 30 cm (12 inches) to any part of the device, including cables
o
specified by the manufacturer. Otherwise, degradation of the perfor-
mance of this equipment could result.
• When the operating environment is relatively dry, strong electromag-
netic interference usually occurs. At this time, the device may be af-
fected as follows:
- the device stops output;
- the device turns off;
- the device restarts;
The above phenomenon does not affect the basic safety and essential
performance of the device, and the user can use it according to the
instruction. If you want to avoid the above phenomenon, please use it
according to the environment specified in the manual.
EN
123