Battery Charging - Caliber Multi-Fi 3 Bedienungsanleitung

*Note: in this mode you can't use internet on your phone or tablet.
"Note: shown images may vary from your situation.
• step 5:
The app will shcy.' "Connecting",
please be patient.
Multi-Fi
Connecting
For play and sound settings, please see steps 8—11under "Connect with Wi-Fi router.
using the USB or SD
• Turn the speaker ON.
• Place an or SD
• The speaker Willautomatically go into USB or SD mode or else use the MODE button
• TOcontrol the playback, use the controls on the speaker.
Connecting by AUX-in
• Turn the speaker ON.
• use the provided 3.5mrn Jack-to-Jack
AUX.in (2).
• The speaker Will automatically go into AUX mode or else use the MODE button
• TOcontrol the playback, use the controls on your external device.

Battery charging

The device has a built-in rechargeable lithium battery. For the first time; charge the
battery for 6 hours. The unit is provided With USB•t0-Mini
Connect the IJSS to a 5V
charging a indicator Will light up and Will turn OFF when fully charged.
The unit Will operate
Of battery life depends on how hard the unit is working. Heavy, loud, bass music Will
use more energy to produce than spoken word.
xx Caliber
card With MP3 files
cable to connect
port and the other end to the DC-in (4) Ofthe unit. While
without the Wire connection
• Step 6:
If all goes well, your device will be
connected, choose "next".
If not, try again starting at step 2 and
after restarting the speaker.
Device added succesfully
MultiFi xx Caliber
Successfully connected to router..
into the reader.
an external
using the lithium battery.
CAL IBER •
device to the
cable.
The amount