Cleaning And Maintenance; Troubleshooting; Disposal; Technical Data - Obi Arnum Originalbetriebsanleitung

– Press [ ] again to turn off the open-window
detection, the light [ ] will go off and the product
will resume to previous working mode.
► P. 5, fig. 7
– (F) is an example to set 23°C during open-window
detection.
– When turn on at the same time for both open-win-
dow detection and weekly program, during the
OFF period of weekly program, the product
doesn't work. During the working status of weekly
program, the temperature is subject to the setting
temperature of open-window detection. (G) is a
example:
Note: Before turn on weekly program: it
must set day and time period, otherwise the
weekly default state is [00], which does not
work.

Cleaning and maintenance

Cleaning the unit
DANGER! Exercise caution – risk of
injury! Always pull the power plug before
conducting any work on the unit.
Error/Fault
Unit does not function or does not
heat
Remote control doesn't work
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.

Disposal

Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.

Technical data

Part number
Rated voltage
Capacity
Switching levels
Protection class
Cause
Unit is switched off or set to ventila-
tion without heating?
No power supply?
Batteries in the remote are empty? Changing the remote control batter-
The unit is not in standby mode?
482031, 482050
230 V~, 50 Hz
2000 W
1000 W
2000 W
II
– Switch the unit off and allow it to cool down com-
pletely.
– Unplug from the power source.
– Wipe the unit with a damp cloth.

Troubleshooting

What to do when something doesn't work...
DANGER! Exercise caution – risk of
injury! Unprofessional repairs may mean
that your unit will no longer operate safely.
This endangers you and your environment.
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Remedy
Switch the unit on or set the required
heating level.
Check the cable, plug, and the fuse.
ies
Connect the power cable to a sock-
et.
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
cling.
GB
27