Xaralyn 4114 Bedienungsanleitung Und Sicherheitshinweise Seite 3

Read manual before
installation and use!
Installation of the bio ethanol burner
Our bio ethanol burners can be placed in our extensive and varied collection of surrounds and inserts. They can
also be used for your own design or existing fireplace. Pleasevisit our website for our product range and the
built-in instruction of the bio ethanol burners.
General
• Make sure that the wall/table/floor on which the bio ethanol burner is placed can carry its weight.
• The bio ethanol burner needs to be placed or hung on a heat resistant foundation or wall.
• Make sure that during installation the bio ethanol burner is levelled, both horizontally and vertically.
This to make sure that liquid cannot flow out of the burner.
• Keep a safety distance of at least 50cm (from the left, right and front side of the burner) to objects.
• Keep flammable objects (e.g. curtains, furniture or bookshelves) away from the bio ethanol burner.
• Do not place the bio ethanol burner next to, underneath
• Do not place the bio ethanol burner in a room with a constant high humidity level.
• Use the bio ethanol burner only in a draught-free room, otherwise soot can be formed.
• Make sure that all possible gas pipes near the burner are closed off.
• During use in closed spaces,enough ventilation has to be provided! In addition to carbon dioxide (C02) an
adequate supply of fresh air should be ensured (120 cm2 opening). There are requirements for the supply of
fresh air quantity per type or burner. Take the minimum
• The EN standard prescribes a maximum heating per room of 4.5Kw. A higher Kw due to the use of multiple
burners has not been investigated and is therefore
Type burner Content ± Size
first filling refill
(liters) (liters) (cm)
4114 41x14x8
4120 + Silo 1,5 41x20x8
5820 2 1,5 58x20x8
2,5
8014 + 8013 80x14x8
11814 2,5 118x14x8
Installation in a Xaralyn surround
• Check the special instructions delivered with your surround.
• Do not hang the Xaralyn surround on a wall with wallpaper or plasterboard with paper, as discolouration
may occur.
• When attaching to a wall, we advise to keep a safety distance of ± 1 cm from the wall in order to ensure
a natural flow of air.
• Never remove the isolation layer on the backside. Risk of fire!
• Do not put any flammable items on top of the appliance.
• After installation of the surround the bio ethanol burner can be placed in its appropriate
Manual Bio Ethanol Burner.indd 4-5
Only use fuel according to Only use in a
the user manual. ventilated room.
or on top of a windowsill. Risk of fire!
room size into account (see table below).
at own risk.
Weight Heat Room Consumption
(advice)
(kg) (Kw) Itr. p. hr.)
min 55
6 0,30
2,5 min 55 0,50
ca.
12,3/ 13,2 ca. 3 min 80 0,50
3,5 0,55
14,1 min 80
18,8 4,4 min 110 0,65
place.
Installation in a made-to-measure project or in an existing fireplace
Please check the built-in instructions of the burners on our website www.Xaralyn.com.
draught-free
Installation of the glass screens or decoration
We advise you to use the enclosed glass screens. The glass screens can be installed on the burner with the
supplied connectors.
Tighten the screws by hand and not too tight, because glass and metal expand when heated. The use of two
glass screens is only necessary when using a fireplace in a doubled faced setting (without
• Xaralyn has developed special ceramic logsets, pebbles and basaltsplit for decoration purposes of the
bio ethanol burner. Place these around the fire opening of the burner (the (white) ceramic element). The fire
opening should be remained free. When decoration
be formed and an unsafe situation may arise.
• Do not use both the log set and/or pebbles at the same time with the glass screens. Risk of fire!
• When placing a bio ethanol burner against a back wall (e.g.(wall)surround),
vertically at all times. This can be created by using glass, log set or pebbles.
• After use do not touch
• For safety reasons never use any other decoration
original Xaralyn ceramic log set or pebbles.
• In case the flames do hit the back, extinguish
our website.
Burning time
Caution!! Temperature of the glass screens and decoration material can reach 900-1400C and the top of the bio
hours)
ethanol burner even 2000C, when the burner is in use!
3
3
How to (re-)fill the bio ethanol
3,5
Xaralyn delivers its own unique fuel: Xaralyn bio ethanol CLI 00. Optimal use of the burner can only be
guaranteed by using our bio ethanol. Never use another liquid or gel to fill or refill the bio ethanol burner, this
may cause blockage or damage to the ceramic element on the inside of the burner, resulting in flames of poor
quality. As a consequence, the warranty expires as well. Exceptions need to be agreed upon by Xaralyn.
Do not smoke while (re)filling or lighting the burner. Risk of explosion!
• Open the latch for one third, so the filling-opening is visible.
• Put the enclosed funnel in the filling-opening.
• Avoid physical contact with the bio ethanol, bio ethanol is highly flammable and should be handled with care.
• (Re)fill the bio ethanol burner carefully and slowly, so it cannot be overfilled.
• Pour the Xaralyn bio ethanol in the funnel until the ceramic brick is saturated.
• Make sure that the liquid level remains underneath the surface of the element: until the liquid remains visible
in the opening and is not higher than the MAX sign.
• It is of great importance
Only use in DO not position the fireplace
surroundings. near combustible items.
This prevents the flames from hitting the backside because of the airflow.
material is placed into the flames, unnecessary soot will
decoration material until it has cooled down for at least
material on top of the bio ethanol burner except the
the fire immediately and check the servicetool
burner
that the liquid never flows outside the filling opening.
(IS)
Never move the appliance while
It is in operation.
a closed backside).
make sure the flames burn
30 minutes. Risk of burns!
and FAQ's on
17-01-19