Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
The display will show xxx.xxx, with the first number flickering. Choose the required
capacity (e.g., for 30kg, input 30) by pressing "↑" + "Enter". Confirm by pressing
"Enter".
5. Zero Track Range Selection:
When "ZEX.X" appears on the screen (X indicates zero track range options: 1.0, 1.5, 2.0,
•
2.5, 3.0, 3.5), press "↑" to select and "Enter" to confirm. The display will then show "-
0-", and subsequent presses of "Enter" will reveal the AD inner code and initiate the
weight calibration mode.
6. Calibration Process:
•
The display indicating "Half" suggests placing half the full capacity weight on the
platform.
For Option 1 ("1 LOAD..."): After the display shows "HALF", place half the full
capacity weight. Wait for stability, then press "Enter". Once "FULL" is displayed, add
the full capacity weight, wait for stability, and then press "Enter" to confirm and
complete calibration.
For Option 2 ("2 LOAD..."): When entering this mode, the display will show xxx.xxx.
Place the indicated weight, press "Enter", and the scale will confirm the weight
entered. Calibration completes once the stability is confirmed and "Enter" is
pressed.
Note: During calibration, use "↑" to select, "Enter" to confirm, and "Mode" to revert to the
previous step.
Simple Calibration:
With the display at 0.00, press "Cali." The scale will continue showing "CAL". Press
•
"SET" to display full capacity, then "↑" + "Enter" to enter the weight. Place the same
weight on the platform and press "Enter" to complete calibration.
Division, Zero, and Speed Setting:
•
Turn on and in weighing mode, press "Enter" + "Cali." until "d xxxxx" (division value)
appears.
•
Select the desired division value (1, 2, 5, 10) using "↑", then confirm with "Enter".
Following this, "ZE X" (zero track range) will display. Choose the desired speed setting
(0, 1, 2) using "↑", then press "Enter" to finalize. The default speed value is 0.
3.4. CLEANING AND MAINTENANCE
a)
Use only non-corrosive cleaners to clean the surface.
b)
After cleaning the device, all parts should be dried completely before using it again.
c)
Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
d)
Do not allow water to get inside the device through vents in the housing of the device.
e)
The device must be regularly inspected to check its technical efficiency and spot any damage.
f)
Do not leave the battery in the device if it will not be used for a longer period of time.
g)
Use a soft, damp cloth for cleaning.
SAFE REMOVAL OF BATTERIES AND RECHARGEABLE BATTERIES
The devices are equipped with 9V / 300mA batteries. Recycle batteries with the appropriate organization
or company.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The
plastics used to construct the device can be recycled in accordance with their markings. By choosing to
recycle you are making a significant contribution to the protection of our environment. Contact local
authorities for information on your local recycling facility.
EN
Werbung
