Inhaltsverzeichnis
Werbung
5. Controls and LC display
You will see all visualizations and symbols of the LC display in the
photo on the fold-out page. These are not all visible at a time during
normal operation.
See the fold-out page for the photo
1 Number of the memory (1-128)
2 Field indicating the storage
3 "SPLIT" time display
4 "STOP" display
5 "FULL" display (indicating that all memories are occupied)
6 "RECALL" display
7 Display indicating whether the alarm function is on or off
8 Function display
Four keys:
A "START/STOP"
B "LAP/SPLIT/RESET"
C "RECALL"
D "MODE"
24
The START/STOP" key allows to switch on by one memory, the
LAP/SPLIT/RESET" (B) key to switch back by one memory
Return to time-taking by pressing the "
causes the inserted "RECALL" to disappear.
When the stop watch is stopped pressing the "LAP/SPLIT/RESET"
(B) key deletes all times and all of the intermediate times are delet-
ed as well.
10. Countdown timer (Dual timer)
The countdown timer uses two different countdown modes:
• Single Timer
Only set Timer 1. Timer 2 has to be at "00:00:00" .
The countdown which is set and started is continuously repeated.
A short sound will be heard during the last 3 seconds, a longer
alarm sound will be heard at 00:00:00.
• Dual Timer
Set the two timers (Timer 1 and Timer 2).
Example: A round lasts 3 minutes in a boxing match and the
break lasts 1 minute.
Set timer 1 to "00:03:00" (3 minutes) and timer 2 to"00:01:00"
(1 Minute).
Timer 1 will be running after the beginning. Once 3 minutes are
reached the alarm sound will be heard and timer 1 will stop (the
round is finished). Timer 2 will start (the break begins). Once 1
minutes is reached the alarm sound will be heard (the break is fin-
ished) and timer 1 will start anew.
" key anew, which
29
Werbung
Inhaltsverzeichnis
