Kenwood KDC-DAB34U Bedienungsanleitung Seite 22

6 Remove the application film (tag III).
Application film (tag III)
Do not touch the lead terminal of film
antenna (F).
7
Set the postion of the protrusion of the
amplifier unit (G) with the K on the film
antenna (F) and paste.
Do not touch the lead terminal or the
pasting surface (adhesive side) of the
amplifier unit (G).
• When installing the antenna on the right
side
Set the position of the protrusion with K mark
Earth sheet
(F)
(G)
Lead contact of the amplifier
unit (metal part)
Lead terminal of the film
antenna (F)
18
• When installing the antenna on the left
side
(F)
Earth sheet
8
Remove the film covering the earth sheet
and paste the earth sheet on the metal
part of the vehicle.
Provide sufficient leeway for the earth sheet
so that it does not interfere with the interior
parts (front pillar cover). Also take care that
the interior parts do not interfere with the
amplifier unit (G).
Front pillar cover
9
Wire the antenna cables.
Use cable clamper (H) to secure the
antenna to the pillar at several positions.
10
Attach the front pillar cover back to its
original position.
Be sure not to damage the earth sheet and
amplifier unit (G) when covering.
11
Connect the amplifier unit (G) to the DAB
input terminal on the rear of the unit.
12 Set [DAB ANT POWER] to [ON]. ( 5)
(G)
(F)
Set the position of the protrusion
with J mark
Windscreen
Earth sheet
(G)