Connection - Kenwood KDC-DAB34U Bedienungsanleitung

Wiring connection
Antenna terminal
DAB input terminal ( 16)
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
Ignition wire
A7 (Red) (Red)
Vehicle
A4 (Yellow) Battery wire
(Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
B1 Purple ]
: Rear speaker (right)
B2 Purple/black [
B3 Gray ]
: Front speaker (right)
B4 Gray/black [
B5 White ]
: Front speaker (left)
B6 White/black [
B7 Green ]
: Rear speaker (left)
B8 Green/black [
Rear/subwoofer output
Yellow (Battery wire)
Red (Ignition wire)
Unit
Red (A7)
Yellow (A4)
ISO connectors
Fuse (10 A)
If no connections are made, do not let the wire
come out from the tab.
STEERING WHEEL
Light blue/yellow
To the steering wheel remote
REMOTE INPUT
control adapter
(Steering remote
REMOTE CONT
control wire)
To the power control terminal
Blue/White ANT CONT
when using the optional power
amplifier, or to the antenna
(Power control wire/
P. CONT
control terminal in the vehicle.
Antenna control wire)
To the terminal that is grounded
when either the telephone rings
Brown
or during conversation. (To
(Mute control wire)
MUTE
connect the Kenwood navigation
system, consult your navigation
manual.)
Part list for
installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH | 15