Heat liquids containing sugar, sweetener, acids, alkalis or alcohol.
Warm up or heat liquids that are inflammable, harmful for health, volatile or with similar attributes or
other substances.
The user is liable for any damage resulting from unintended use of the device.
3.1.
Device description
3.2.
Preparing for use
BERORE THE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged,
please contact your transport company and distributor within 3 days, and document the damages as
detailed as possible. Do not turn the package upside down! When transporting the package, please ensure
that it is kept horizontal and stable.
DISPOSING OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem,
the device can be sent back to the service centre in accurate condition!
3.3.
Assembling the device
PLACING THE DEVICE
The work surface where the device will be located must be suitable for the size of the appliance, please
refer to the measurements. The work surface must be levelled and dry and should have a suitable height
from the ground to enable proper use of the device. The environmental humidity should not exceed 85%.
The power cord connected with the appliance must be reliably grounded and should correspond to the
technical details.
3.4.
Device use
CONTROL PANEL
EN
1.
Control panel
2.
Cover
3.
Basket
4.
Oil drain tap