Wiesenfield WI-CF-110 Bedienungsanleitung Seite 11

Assembling the device
Steps
1. Use 4xM4 screws to assemble the stepping board into two longer strips.
2. Assemble two side panels to the main container with 8xM4 screws.
3. Mount the two longer strips with the assembled stepping board to the side panels with M6 nylon nuts and
M6 screws. Only tighten the screw so far that the strips can still move.
4. Use 2xM4 screws to assemble two short strips to the lid on both sides.
5. Join the long and short strips with 2xM4 screws. Only tighten the screw (for steps 4 and 5) so far that the
strips can still move.
EN
1- M6 nylon nut
2- M4 Philip's screw