Create TV Move Studio Bedienungsanleitung Seite 8

1. Open the product box.
2. Take the TV out of the box and place it on a stable, flat surface.
3. Check that it has a battery. If not, connect it to a power outlet.
NOTE: This portable TV contains a built-in lithium battery. To keep the battery in optimum con-
dition, when you use it for the first time, drain the battery completely and then fully charge it by
connecting it to the mains.
Please note: The number and names of terminals may vary depending on the region or model.
External equipment and cables shown in this manual are not supplied with the TV.
• DC INPUT
Connect the TV set to the mains.
• ANTENNA INPUT
Connect a coaxial cable to receive the signal
from the antenna, cable or satellite.
• ENTRADA DE ANTENA
Conecte un cable coaxial para recibir la señal de
la antena, cable o satélite.
• USB PORT
Connect a USB storage device.
• HDMI INPUT
Receives HD input signal from external HDMI
devices.
• AUDIO
Use an optical cable to output the audio signal
from the TV to a compatible digital audio receiver.
• WLAN
Connect the WLAN cable to the network port to
have an internet connection from your TV.
• CI PORT
In this port you can connect a CI card to the tel-
evision.
8 E NGL I SH
PRODUCT INSTALLATION
TERMINAL CONNECTION
Camera
DVD STB
Antena Cable TV satelite
USB
Camera Recorder/DVD
audio device
Router
CI card