ieGeek ZS-GX3S Bedienungsanleitung Seite 17

For more detailed FAQs,please log in to the APP,
search in
Camera"
The device prompts offline?
1 ) Check whether the equipment is in the power-
on state, and observe whether the working light
of the equipment
2) Confirm that the current location has good wifi
coverage and the network is stable, make sure
that the wifi signal is above 75%;
3) You can try to use the third-party wifi analysis
tool fiNifi analyzer" to analyze the current wifi
signal coverage and interference
coverage is poor and the interference
it is recommended
installation position or adjust the router position
or use a second-stage
4) Avoid using wifi extenders.
Update router or Wi-Fi password?
Delete the camera from your CloudEdge account.
After resetting the device, use the new Wi-Fi and
password to add it again.
Will not connect
l) Thewifi currently connected to the the mobile
phone is a 2.4Ghz network; The current location
has good wifi coverage and a stable network
(wifi signal is greater than 75%);
2) Avoid using wifi extender;
3) Check whether the wifi password is entered
correctly;
It cannot be ruled
special network incompatibility,
the camera
this case, our camera
contact the after-sales service first(service@
iegeek@com)
07 [FAQs
is on normally;
to replace the camera
to WiFi?
out that
cannot be connected
is not compatible,
EN | 11
Documentu-VBattery
status. If the
router;
in the rare case
the App and
correctly. In
is large,
of
please