Sharp VC-SV06AEU-G Bedienungsanleitung Seite 14

EN
AC Adapter
Your SHARP stick vacuum is supplied with an AC adapter which can be used with either a UK (3-pin) or EU (2-pin) mains socket.
The AC adapter supplied with your stick vacuum will depend on the vacuum and battery model, refer to the table below to match
up the vacuum model and AC adapter.
Only use the supplied and SHARP recommended AC adapter with your Stick Vacuum.
AC adapter specifi cations can be found at the end of this User Manual.
Changing the adapter mains connection type
Your AC adapter is supplied with 2 mains connection plates which can be interchanged depending on your mains outlet type. The
connection plate on the left is for the UK, Ireland and Cyprus. The 2-pin coneciton plate on the right is for most other EU countries.
To install the correct plate fro your mains outlet, select the correct one (UK pr EU) and place on the AC adpater as shown in the
picture below, the plate should sit in the recess. Turn clockwise until a click is heard and the connection plate is now installed. If
you are unsure, please contact our helpline for advice.
To remove the plate, press the button A and rotate the plate anticlockwise. The plate can now be removed.
UK EU
UK EU
A
EN – 14 EN – 14