Sharp VC-SV06AEU-G Bedienungsanleitung Seite 12

EN
Display panel
The multifunction display panel shows important information on the function and use of your stick vacuum.
To change the speed of the motor from ECO (most effi cient) to Turbo (most powerful), press this button. When the unit is off , press
this button to show how much power is left in the battery for each mode of operation.
1. Percentage of battery power remaining.
2. Mode selection button – ECO or Turbo power.
3. Visual indication of remaining power based on battery level. This wil change when the mode button is pressed.
4. Operation mode. This will change when the mode button is pressed.
In the case of any issue occurring with your stick vacuum it is possible that an error code may be shown on the display panel.
Consult the Troubleshooting section of this user manual for more details should an error code appear.
General cleaning and maintenance
To ensure that your SHARP stick vacuum remains in good condition and continues to provide reliable service, it is recommended
to clean and maintain it on a regular basis.
Exterior Parts can be cleaned with a soft cloth. If there are stubborn marks, use a non-abrasive, gentle cleaning fl uid to remove.
Never use abrasive cleaners or cloths to maintain your SHARP stick vacuum as these will damage the surface.
General tips after use are:
1. Empty the Dust Chamber
Suction is reduced if the dust chamber is full of debris, so emptying after and during use will provide a much better cleaning
experience.
1
2
4
EN – 12 EN – 12
3