Start Operation; Control Panel - Kuppersberg Rbw 85 Technischer Pass

TECHNICAL PASSPORT
Built-in wine Cooler
OPERATION

START OPERATION

1. Cleaning the compartment.
Before power on, clean inside of the
appliance and check the drainage pipe in
good connection (For details, please refer
to the «Maintenance and cleaning»).
2. Placement.
Before power on in the first time, keep
it static at least 30 minutes.
3. Power on.
The appliance start operation and
it will cool down inside after 1 hour,
otherwise you should check the power
connection.

CONTROL PANEL

All keys would be invalid if in lock
mode. Please unlock first.
ON/OFF
1. 1In the unlock state, keep pressing
the key 3 seconds, power down, goes to
stand-by mode.
2. Keep pressing the key again 3 se-
conds, returns to normal working.
Light
In the unlocked state: press the key
turn on or turn off the LED lights. In stand-
by mode, the key is invalid.
20
The display screen has three colors:
white, blue and orange. When holding
down the light button for 3 seconds to
switch to blue light.
UP
Press the key once, LED Display in reg-
ular flash showing current set tempera-
ture. Continue pressing to adjust set tem-
perature, one press increases 1
flash quit after 5 seconds detecting no
press and new set temperature save. LED
display return to show actual temperature
inside.
Down
Press the key once, LED Display in
regular flash showing current set tem-
perature. Continue pressing to adjust set
temperature, one press reduces 1
lar flash quit after 5 seconds detecting no
press and new set temperature save. LED
display return to show actual temperature
inside.
Child Lock
(Combination key)
1. Lock: Press both keys
same time for 3 seconds to lock.
2. Unlock: In the lock state, press both
keys + at the same time for 3 sec-
onds to unlock.
Fahrenheit/Celsius
interchange (Combination
key)
, Switch temperature display between
Fahrenheit and Celsius by pressing both
keys at the same time for 2 seconds.
ENGLISH
С. Regular
о
С. Regu-
о
+ at the