Installation - Kuppersberg Rbw 85 Technischer Pass

TECHNICAL PASSPORT
Built-in wine Cooler
INSTALL ATION
POSITION
Do not lean the appliance over 45°
when moving it to position.
 The appliance must be put on flat,
firm & dry floor or similar noncombusti-
ble pad; do not use the package foam pad.
The appliance is designed to fully
build into the cabinet.
Demonstration for building under the
counter:
Wine bottles could be stored when you feel cooling inside after the appliance
operates around 1 hour.
18
 Do not put the appliance in the
wet place.
 Do not use the appliance in the
frozen place.
 Do not use the appliance outdoor
in case of sunlight or rain.
ENGLISH