Description Of The Appliance; Start Operation; Control Panel - Kuppersberg Rbw 86 Technischer Pass

TECHNICAL PASSPORT
Built-in wine Cooler

DESCRIPTION OF THE APPLIANCE

ACCESSORIES & NAME
1. Housing
2. Shelf

3. Control panel

4. Cover board
5. Grill
6. Adjustable foot
NOTE: Shelves, door frame, handle
and other accessories could be different
according to different models and config-
uration. All photos in this manual are for
OPERATION

START OPERATION

1. Cleaning the compartment.
Before power on, clean inside of the
appliance and check the drainage pipe in
good connection (For details, please refer
to the «Maintenance and cleaning»).
2. Placement.
Before power on in the first time, keep
it static at least 30 minutes.
3. Power on.
The appliance start operation and
it will cool down inside after 1 hour,
otherwise you should check the power
connection.
18
reference. The appliance you buy might
not be exactly the same as shown here.
Please refer to the actual product.
CONTROL PANEL
All keys would be invalid in lock
mode. Please unlock first.
ON/OFF
1. Keep pressing the key 3 seconds,
power down, goes to stand-by mode.
2. Keep pressing the key again 3 sec-
onds to return back to normal working.
Light
Press the key, turn on or turn off the
LED lights inside. In stand-by mode, the
key is invalid.
ENGLISH
10. Upper hinge
9. Door seal
8. Door
7. Lower hinge