VEVOR CS303 Benutzerhandbuch Seite 8
Audio komponenten ständer
Inhaltsverzeichnis
● Drill four 1/8" (3mm)
diameter holes 1.2" (30mm)
deep. Secure it using four
screws(A), make sure that
the wall plate is level as
shown in fig.1.1.
STEP1-b: SOLID BRICK AND CONCRETE BLOCK
MOUNTING:
● Use the wall plate as a template to mark locations of four holes on
the wall as shown in fig.1.2.
6
Inhaltsverzeichnis
