VEVOR CS303 Benutzerhandbuch Seite 12

STEP4: INSTALLING THE GLASS SHELF
Place the three glass shelf gently on the three glass holders
respectively. Attach the glass shelves to the glass holders using
screws and plastic bushes, tightening screws with a 3mm Allen key
but not tighten completely at this time. Center the glass shelves over
holes, securely tighten screws with a 3mm Allen key as shown in
fig.4.1.
● You can adjust the height
of the glass holders as
needed. Loosen the screws
with a 3mm Allen key(but
not remove) to adjust the
glass holders at the desired
height and then tighten
screws with a 3mm Allen
key as shown in fig.3.2.
10