Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTRUCTIONS
Use
1. Insert the batteries you want to charge into the slot(s).
2. Plug the USB-C end of the charging cable into the input port. Plug the other end into the
mains adapter (not included, requires 5 V / 2 A). Plug the other end of the adapter into
a properly grounded mains outlet.
3. Charging will start. The LED indicators on occupied slots will gradually light up.
4. When a slot's LED indicators stop flashing and glow steadily, the battery is fully charged.
LED indicators
All of a slot's LED indicators are lit: the battery is charged.
A slot's LED indicators keep lighting up in sequence: the battery is charging.
A slot's LED indicators are flashing rapidly: battery fault. Remove the affected battery from
the slot.
The number of lit indicators approximates the battery's initial charge level when inserted.
SAFETY INFORMATION
Read the safety and operating instructions. Failure to observe the safety and operating instruc-
tions can endanger people or damage the device.
This product is only suitable for household use.
Use and store the product out of the reach of children. Children must not use this product.
This product is designed to charge batteries. Only use it for this purpose.
This product is not intended for battery storage. Remove batteries from the product immedi-
ately when charged. Keeping charged batteries in the product risks electrolyte leakage and
irreversible damage to the product.
ENGLISH
7
Werbung
