Aiwa AD-R505H Bedienungsanleitung Seite 40

Rate Nes eee
SPECIFICATIONS
Type
Track format
Power supply
Stereo cassette tape deck
4 tracks, 2 channels
AD-RS505E, Z
AC 220 V, 50 Hz
AD-R505K
AC 240V, 50 Hz
AD-R505H
AC 110-120 V/220-—240 V
switchable, 50/60 Hz
AD-R505U, C
AC 120 V, 60 Hz
Power consumption
Frequency response
12 W
METAL tape: 20~-18,000 Hz
CrOz tape: 20-17,000 Hz
NORMAL tape: 20~-16,000 Hz
Signal-to-noise ratio
Wow and flutter
Tape speed
Recording system
Erase system
Motor
Heads
44
73 dB (METAL tape DOLBY C NR
ON above 5 kHz)
0.065% (WRMS)
0.18% (according to DIN 45500)
4.8 cm/sec. (17/8 ips)
AC bias (frequency 85 kHz)
AC erase
DC servomotor (1)
Record/playback head (1)
Erase head (1)
(Double-gap ferite head)
DIN max sensitivity (Z model
only): 0.4 mV/kQ (3.3 kQ)
PLAYILINE OUT standard output
level: 350 mV (0 VU); suitable load
impedance: over 47 kQ
DIN standard level (Z model only):
0.3 V (0 VU)
. PHONES: 0.14 mW (320)
Dimensions 430(W) x 133(H) x 269(D) mm
Weight 3.9 kg
Accessorles Connection cord (2)
Outputs
The specifications and external appearance of this set
are subject to change without prior notice.
Note:
Please check the copyright laws relating to recordings
from discs, radio or external tape for the country in
which the machine is being used.
@ Dolby noise reduction and HX Pro headroom exten-
sion manufactured under license from Dolby Labora-
tories Licensing Corporation. HX Pro originated by
Bang & Olufsen.
© "Dolby" the double-D symbol, DM] and "HX PRO"
are trademarks of Dolby Laboratories Licensing Cor-
poration.
Frequenzgang Reinelsenbander: 20-18.000 Hz
CrO2-Band: 20-17.000 Hz
NORMAL-Band: 20-16.000 Hz
Stérspannungsabstand
73 dB (Metallband, mit Dolby-C-
Rauschunterdriickung 5 kHz
oder mehr)
Gleichlaufschwankungen
0,065% (WRMS)
0,18% (gemaB DIN 45500)
Bandgeschwindigkeit
;
4,8 cm/s
Motor Gleichstrom-Servomotor (1)