Herunterladen Diese Seite drucken

Frigelux CCO148BE Benutzerhandbuch Seite 27

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 35
Switching on – Locking/Unlocking:
When the system powers up, all LEDs and the digital display will illuminate and then return to
normal display after 2 seconds.
The control panel locks automatically after 3 minutes of inactivity. To unlock the control panel,
press a key then hold down the key
Operating modes
temperature mode refrigeration: 8 ℃ ~2 ℃
temperature mode Freezing: -12 ℃ ~-24 ℃
Temperature setting:
Unlock the device before using it. The temperature display flashes when you press the "+" or
"-" setting buttons. The "+" and "-" keys allow you to modify the set temperature by 1°C
upwards or downwards.
If the temperature is set to 2 ℃, it will be adjusted to -12 ℃ after pressing the "-" key;
If the temperature is set to -24 ℃, it will be adjusted to 8 ℃ after pressing the "-" key;
If the temperature is set to -1 2 ℃, it will be adjusted to 2 ℃ after pressing the "+" key;
If the temperature is set to 8 ℃, it will be adjusted to -24 ℃ after pressing the "+" key.
Fast Freeze
When the "Fast Freeze" function is activated, the freezer temperature is automatically set to -
32 ° C for 26 hours, after this time the Fast Freeze function is automatically deactivated. Rapid
cooling of freezer temperature is beneficial for preventing loss of food nutrition and preserving
freshness.
When the "Fast Freeze" function is active, the temperature is automatically "- 32°C",
the temperature cannot be changed.
Enable/disable the Fast Freeze function; When the keys are unlocked, you can hold
the "+" key for 3 seconds to activate or deactivate the "Fast Freeze" function.
Remark:
If the freezer temperature is set below freezing (freeze mode) before the fast freeze
function is activated, it will be displayed again by default when the "Fast Freeze" function is
deactivated; and if the freezer temperature is set above zero (refrigeration mode) before quick
for 3 seconds.
27

Werbung

loading

Diese Anleitung auch für:

Cco200besCco203beCco302besCco303beCco401be