Reverse the door
The side in which the door opens can
be changed from the right side (as
supplied) to the left side, if the
installation site allows for it.
Reverse
WARNING
When reversing the door, the
appliance must not be connected to
the mains. Ensure that the plug is
removed from the mains socket.
Tools you will need:
1. 8mm socket driver
2. Cross-shaped screwdriver
3. Putty knife or thin-blade screwdriver
NOTE
you should rest the appliance on soft
foam packaging or similar materil to
avoid damage. Stand the refrigerator
upright. Open the upper door to take
out all racks (to avoid racks
damaged) and then close the door.
1
2
2
26