Electronic Controls - Hisense Rb3B250Sewe1 Bedienungsanleitung

Electronic controls

All functions and controls of the unit are accessible from a control panel
conveniently located on the roof of the cabinet. A display circuit board allows easy
configuration of features and settings in a simple and intuitive manner.
Display Controls
Use your appliance according to the following control regulations, your appliance
has the corresponding functions and models as the display panels showed in the
pictures below. When the appliance is powered on for the first time, the backlighting
of the icons on display panel starts working. If no button have been pressed and the
doors are closed, the backlighting will turn off after one minute.
1. Power
If you want to stop using it, you can
turn the appliance off by pressing
"Power" button for 3 seconds.
Press and hold "Power" button for 3
seconds to turn the standby function
on or off . When the standby function
is on, the display panel will show "--".
IMPORTANT!
Do not store any food in the fridge
during this time. If you will not use the
refrigerator for a long time, please pull
the plug.
When the standby function is on, the
refrigerator is stopped cooling.
NOTE
2. Eco
Press the "Eco"
the energy saving function, the
" " icon will be illuminated.
When the Eco function is on, the
temperature of fridge is automatically
switched to 6°C and the temperature of
freezer is automatically switched to
-17°C .
When Eco function is on, you can switch
it by pressing the "Temp"
"Eco" button and the refrigerator
temperature setting will revert back to
the previous setting.
3. Super Cool
The Super Cool feature helps to
keep food stored in the refrigerator
at the set temperature during
Electronic Control (located
at the top of appliance)
with WiFi function
Electronic Control (located
at the top of appliance)
without WiFi function
button to turn on
or
13