If the printer is left idle for some time, it goes into sleep mode and switches off the front-panel display.
To change the time that elapses before sleep mode, press
between 5 and 240 minutes.
The printer wakes from sleep mode and switches on the front-panel display whenever there is some external
interaction with it.
You can use the printer's auto-off feature to turn the printer off automatically. For example, setting it to 2 hours turns
the printer off after 2 hours of inactivity. In this way, you can save more energy. However, the auto-off feature is
automatically disabled when the printer is connected to the network, to avoid inconveniencing network users.
Web Services
To keep the printer up to date
effortlessly.
Make sure that your printer is correctly connected to the Internet.
Enable Web Services during initial setup of the printer, or later by pressing
, then
Printing by email (HP ePrint)
If you can email it, you can print it.
Simply attach a PDF or other print-
and send it to your printer's
dedicated address.
Printer preferences
> Sleep. You can set a time
(PDF, TIFF, JPEG)
on the home screen and
Introductory Information
3