Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Getting Started Guide
Before use, two AAA batteries must be fitted
before installation.
The KL1200 NetCode
a factory set Master Code (11335577)
and the Private Use Function enabled.
In Private Use, the lock will remain locked
until a valid 4 digit User Code is entered.
On entry of a valid User Code, the lock
will open and remain open for 4 seconds.
Enabling NetCode
generate time sensitive codes.
FUNCTIONS
Three functions are available:
Private Use (enabled by default), Public Use
and NetCode
remain unlocked until a user enters their own
4 digit User Code to lock. On re-entry of the
same 4 digit code, the lock will unlock until
the next 4 digit code is entered.
SET NETCODE
To set up a NetCode
NetCodes, an internet connection is required.
Visit www.codelocksconnect.net. If you do not
have an account, you will need to register.
Once signed-in, follow the prompts to Add
a New Lock.
Full Programming & Operating Instructions
and Installation Instructions are available on
our support website: codelockssupport.com
CHANGING THE MASTER CODE
#Master Code
•
New Master Code
Example: #11335577
•
12345678
Result: The Master Code has been changed
to 12345678.
®
will allow you to remotely
®
. In Public use, the lock will
®
®
lock and generate
®
•
01
•
New Master Code
••
•
••
is supplied with
01
•
12345678
1 1
Werbung
