NUTRIBULLET Triple Prep System Bedienungsanleitung Seite 6

warm to the touch,
the contents may be
heated and pressurized,
causing the Cup to
violently separate when
opened, which can
result in bodily injury
and burns. If the Cup
feels hot or warm, take
the following steps:
1. LEAVE ALONE, DO NOT
OPEN. Leave the Cup
where it is and do not
touch it or allow others
to touch it.
2.
Do not attempt to
disengage the Cup
from the Motor Base.
DO NOT
attempt to
separate the Cup from
the Extractor Blade
by applying heat or
force, or prying apart
the components, which
may crack or shatter
the Cup resulting in
bodily injury.
3.
Do not continue to
blend.
4.
Allow the Cup to cool
for at least 30 minutes.
10
5. After 30 minutes, check
if the Cup is completely
cooled. If still warm,
allow to cool more.
6.
If cool to the touch,
slowly disengage the
Cup from the Motor
Base.
7.
With the Cup pointed
away from your face
and body, use a towel
and slowly untwist the
the Extractor Blade
from the Cup to gently
release any residual
pressure.
NEVER
attempt to
separate the Cup from
the Extractor Blade by
forcing or prying apart
the components or
applying heat, which
may crack or shatter
the Cup, resulting in
bodily injury. If you
are unable to untwist
the Extractor Blade
from the Cup, contact
Customer Service.
If you are unable to
untwist the Cup from
the Extractor Blade,
dispose of the Cup
and contents properly
so you or others
will not be injured if
fermentation causes
the Cup and blade to
separate. NEVER leave
the sealed contents out
for a prolonged period
of time. The contents
may ferment, causing
the Cup to violently
separate, which may
result in bodily injury or
property damage.
CUP SAFETY
Proper Cup use is
important for the safe
operation of your
nutribullet . Using the
®
Cup inconsistent with
these instructions may
result in bodily injury,
property damage, or
damage to your unit.
NEVER
Remember, blend
hot, warm, or carbonated
ingredients or liquid in
the nutribullet Cup!
®
• ALWAYS securely
tighten the Extractor
Blade to the Cup to
prevent leakage.
• Always make sure the
Cup is securely locked
on the Motor Base
before blending. The
motor will not turn on
unless the Cup is set in
the locked position.
• Do not overfill or exceed
the MAX line. Exceeding
the MAX line can result
in leakage.
• Do not remove the
Cup while the unit is in
operation.
• NEVER operate your
nutribullet Cup if
®
empty.
• Do not attempt to
disengage the Cup
from the Motor Base
if the Cup starts to
leak during blending.
Leakage can indicate
that the Cup is about
to separate from the
blade, which can
expose the blade
11