Using The Nutribullet ® Food Processor - Nutribullet Triple Prep System Bedienungsanleitung

Using your
Triple Prep System:
food processing
nutribullet Food Processor
®
Food Processor
Using the
inconsistent with the
instructions contained in
this User Guide may result
in bodily injury, property
damage, or damage to your
unit. To reduce the risk of
severe injury to persons or
property damage, always
keep in mind:
• Blades and Discs are sharp.
Handle with care by the center
plastic area.
• Do not use excessive force
to push food down the Feed
Chute Food Pusher.
with the
For best results, start your
Food Processor first before
adding food into the Feed
Chute.
40 40
Feed
• Do not overload the
Chute. Allow food to move
down the Feed Chute
naturally.
NEVER
• put hands, fingers, or
utensils inside the Feed Chute
Work Bowl.
or
NEVER Blade
• store exposed
Attachments or Discs in the
Work Bowl.
• A scraper or spatula may be
used, but only when the unit is
powered off.
Using the Chopping Blade:
chop, mix, and mince food.
1
Work Bowl
Place the on a flat,
clean, and dry surface. Place
Blade Adapter
the atop the
central shaft and push the
Adapter down to secure into
place.
3
Prep ingredients and add
Work Bowl. Remove
to the
seeds, stems, and other non-
edible pieces. Cut large items
into 1-2 inch pieces before
processing. Do not exceed
the MAX line.
2
Chopping Blade
Place the
onto the Blade Adapter shaft.
WARNING! Blades and Discs
are sharp. Handle with care.
4
Place the Work Bowl onto the
Motor Base. Twist
unplugged
clockwise. The Work Bowl will
click when locked into place.
41